Open 24 hours, seven days a week โ€ข Charlotte, NC Call (704) 419-7362Request service

Faucet repair in Charlotte, NC

Dripping spout, water in the sink cabinet, or a kitchen faucet that suddenly runs at half strength? Most faucets can be saved with the right cartridge, washer or hose. We find the actual cause, tell you if repair makes sense, and give you a flat price before we start.

Why a faucet drips, and which kind you have

Dripping two-handle faucet with a worn stem washer in an older Charlotte bathroomA plumber using a basin wrench to tighten a faucet nut under a sink

A drip comes down to one worn seal. Which seal depends on the faucet. Older two-handle faucets, the kind still found in plenty of 1950s and 60s ranches around town, are compression faucets. Each handle turns a threaded stem that squeezes a rubber washer down onto a brass seat. Over the years the washer flattens and the seat gets grooved, and water sneaks past. A new washer costs pennies, but if the seat is cut, the drip is back in a month, so we dress or replace the seat in the same visit.

Most single-handle faucets from the last thirty years use a cartridge or a ceramic disc instead. Water passes through ports that line up when you lift the handle. When the O-rings dry out or grit scratches the disc, you get a drip from the spout or water seeping out around the handle. The fix is a new cartridge matched to the brand and model. Honestly, the hard part is usually getting the old one out. A cartridge that has sat for fifteen years can be seized in the body, and forcing it with the wrong tool is how people crack a perfectly good faucet.

One tap runs weak? Start at the aerator

Faucet aerator screen packed with grit, held in a homeowner's hand

If one faucet suddenly runs thin or sprays sideways and the rest of the house is fine, unscrew the little screen at the tip of the spout. Most of the time it is packed with grit. When Charlotte Water flushes hydrants or a crew works on the main in your street, sediment gets stirred up, rides into the house, and stops at the first fine screen it meets. Rinse it, screw it back on, and you are done.

When a clean aerator does not help, the grit went further, into the cartridge ports or the small inlet screens some brands hide at the supply connections. We take the faucet apart and clear it. And if every fixture in the house is weak, the faucet is not your problem. Our low water pressure guide covers the whole-house causes.

Leaks under the sink and worn pull-down hoses

A plumber checking a leak under a kitchen sink with towels spread on the cabinet floorSupply lines, shutoff valves and drain pipes inside a sink cabinet

Water in the sink cabinet usually comes from one of four spots: the supply lines, the shutoff valves, the faucet's own connections, or the drain. We dry everything, run the water, and watch, which beats guessing. Braided supply lines last a long time but not forever, and older plastic or chrome copper risers crack right at the compression nut. If your stops are the old multi-turn kind that only half close, we swap them for quarter-turn valves while the water is already off.

Kitchen pull-down faucets have a weak spot of their own. The hose that runs down through the faucet body flexes every time you pull out the sprayer, and eventually it splits, or the quick-connect under the sink starts to weep. Often the only sign is a damp cabinet floor or a musty smell. Moen, Delta, Kohler and most other big brands sell replacement hoses, so this is normally a repair, not a new faucet.

Outdoor faucets and hose bibs

Plumber installing a new frost-free hose bib on a brick Charlotte home

An outside faucet that drips from the spout has a worn washer, same as an old compression faucet indoors. One that leaks from behind the handle needs new packing or a new stem. The one to worry about is the faucet that sounds like it is running inside the wall when you open it in spring. That means the pipe behind it split over the winter, usually because a hose stayed attached through a cold snap. We replace those with frost-free bibs pitched so they drain, and that typically runs $150 to $350 depending on how easy the pipe is to reach. The hose bib cost guide has the details.

Repair it or replace it?

A new stainless pull-down kitchen faucet installed over a farmhouse-style sink

We usually tell people to repair when the faucet is a name brand, roughly fifteen years old or newer, and the body is sound. Parts for Moen, Delta, Kohler, American Standard, Pfister and Grohe are easy to get, and Moen and Delta cover many of their faucets with a lifetime parts warranty for the original owner, so the cartridge itself may cost you nothing. Store-brand and online-only faucets are hit or miss. For some of them, parts are simply not sold, and replacing it is the honest answer.

Replace it when the finish is flaking, the body is cracked or corroded, the spout still wobbles after tightening, or you are on your second cartridge in a couple of years. A repair generally costs less than a new faucet, which usually runs $150 to $350 installed depending on the model and the shape of your shutoffs. You get a flat price before any work. If you already bought a new one, we can put it in through our fixture installation service.

FAQ

Faucet repair questions

How do I tell if my faucet has a cartridge or a washer?

Two separate handles that you twist several turns, and that get harder to close as they age, are almost always compression faucets with rubber washers. A single lever, or two handles that only turn a quarter or half turn, means a cartridge or ceramic disc. If you can find the brand name on the faucet, send us a photo and we will usually know the exact part before we arrive.

Is a dripping faucet really worth fixing?

Yes, though it is rarely an emergency. A steady drip of one drop per second adds up to roughly 3,000 gallons a year, and on the hot side you pay to heat that water too. A drip that keeps getting worse can also wear the seat or cartridge to the point where a cheap repair turns into a new faucet. Book it during normal hours and skip the after-hours fee.

Can you repair a Moen or Delta faucet that is under warranty?

Yes. Both companies will usually ship a free replacement cartridge or hose to the original owner if you call them with the model number. You can order the part yourself and have us install it, or we can use a part from the truck and save you the wait. We will tell you which way is cheaper for your situation before we start.

Why is my sink cabinet wet when the faucet looks fine?

The leak is usually below the countertop where you never look. Common culprits are a cracked supply line at the compression nut, a shutoff valve weeping at the stem, a pull-down hose split inside the cabinet, or a loose slip nut on the drain. Put a dry paper towel under each connection, run the water, and see which one gets wet first. That narrows it down fast.

How long does a faucet repair take?

Most washer and cartridge repairs take under an hour once the right part is in hand. Moen and Delta cartridges are easy to get the same day in Charlotte. Older or less common brands sometimes need a trip to the parts house, and a cartridge seized into the body can add time. Replacing an outdoor faucet with a split pipe behind it takes longer because of the access work.

What Charlotte Homeowners Say

We're new to Charlotte, and we're building our reputation the only honest way there is: one job at a time, done right, at the price we quoted. Every Hornets Nest job comes with flat-rate pricing, a licensed and insured crew, and a real person answering the phone 24/7.

Review us on GoogleCall (704) 419-7362

Faucet dripping or leaking?

Call or send us a photo of the faucet, and we will tell you what it likely needs and what it will cost before anyone comes out.

๐Ÿ“ž Call (704) 419-7362
๐Ÿ“ž Tap to call (704) 419-7362