Gas line installation and repair in Fort Mill, SC
Most Fort Mill homes are newer and piped with CSST sized for exactly what the builder installed. That works until you add a tankless water heater, a generator or a fire pit. We size the new load, run the line, pressure test it and get it inspected, with a flat price up front.

Going tankless usually means a bigger gas line

This is the most common gas job we get in Fort Mill. The tank in the garage is hitting ten or twelve years, and the homeowner wants tankless. A standard 50 gallon gas tank burns somewhere around 40,000 BTUs an hour. A whole-house tankless unit can pull close to 200,000 when two showers and the dishwasher run together. The half-inch line the builder ran to the old tank simply can't carry that.
So the job usually involves a larger line from the meter or the main trunk to the new unit, sized against everything else on the system. That gas upgrade typically runs $500 to $1,500 on top of the heater itself. If someone quotes you a tankless swap with no mention of the gas line, ask them how they sized it. Our tankless water heater page covers the unit side of it.
CSST in newer walls: bonding and stray screws

Baxter Village and the subdivisions that went up after 2000 were mostly piped with CSST, the yellow flexible tubing. It's quick for builders and has few joints. Two things go wrong with it. First, it has to be bonded to the electrical ground so a lightning strike nearby can't arc through it, and some installs skipped that or lost the clamp during later work. Second, it runs through walls where people hang TVs and shelves. Protective plates are supposed to cover it where it passes through studs, but a long screw in the wrong spot can still find it.
If you smell gas after drilling into a wall, don't pull the screw out. Leave it, get out, and make the call from outside. A punctured section of tubing gets cut out and spliced, usually $400 to $800.
Generators and who supplies the gas

Standby generators are popular here, and most generator hookups we do run between $1,200 and $3,500. The utility owns the meter and decides whether it can carry the extra load. Natural gas service in York County isn't one company everywhere, so check the name on your gas bill. That's who you call about a meter upgrade, and it's also the emergency number you want saved in your phone. On our end, we put the generator on its own branch with a shutoff right at the unit, so it can be serviced without killing gas to the house.
Permits and leaks on the South Carolina side
Fort Mill is in York County, South Carolina, so gas permits and inspections go through the local building office for your address, the town if you're inside town limits, or the county if you're not. We pull it and schedule the inspection. The line gets pressurized and has to hold steady before the inspector signs off.
And if you ever catch a rotten egg smell, the house is not the place to figure it out. Get everyone outside, skip the light switches, and phone 911 or your gas company once you're away from the building. When they've made it safe, we'll handle the repair.
Gas line installation and repair in Fort Mill, SC questions
Who supplies natural gas in Fort Mill, SC?
It depends on your address. Natural gas service in York County isn't handled by one company across the board, so the simplest way to know is the name on your gas bill or on the meter. That company owns the meter and handles meter upgrades and gas leak emergencies. We handle the house piping on your side of the meter.
Can the gas line in my Fort Mill house handle a tankless water heater?
Usually not without changes. Builders sized the lines in most Fort Mill homes for a tank water heater, a furnace and maybe a range. A whole-house tankless unit needs far more gas than a tank, so the line to it, and sometimes the meter, has to be upsized. That gas upgrade typically runs $500 to $1,500 on top of the unit.
Do you pull gas permits in Fort Mill and York County?
Yes. Gas work in Fort Mill gets a permit and an inspection through the local South Carolina building office, either the town or York County depending on where you live. We pull the permit, pressure test the line and meet the inspector. Our flat price includes all of that.
How much does a generator gas line cost in Fort Mill?
Most standby generator hookups in Fort Mill fall between $1,200 and $3,500. Distance from the meter is the biggest factor, along with trenching and whether the meter can carry the generator plus your furnace and water heater. If your gas company needs to upsize the meter, we tell you before work starts so the electrician's schedule lines up.
What Charlotte Homeowners Say
We're new to Charlotte, and we're building our reputation the only honest way there is: one job at a time, done right, at the price we quoted. Every Hornets Nest job comes with flat-rate pricing, a licensed and insured crew, and a real person answering the phone 24/7.
Adding tankless or a generator in Fort Mill?
Tell us what you're installing and we'll size the line and give you a flat price with the permit and inspection included.
📞 Call (704) 419-7362